Danby DPAC 5009 Operations Instructions download pdf (Page 5)

The power cord supplied with this air conditioner contains a device that

senses damage to the power cord. To test if your power cord is working

properly, you must do the following:

Your Danby appliance is designed to be highly efficient in energy

savings. Follow these recommendations for greater efficiency.

1) Select a thermostat setting that suits your

comfort needs and leave at that chosen

setting.

2) The air filter is very efficient in removing

airborne particles. Keep the air filter clean at

all times.

3) Use drapes, curtains or shades to keep

direct sunlight from penetrating and heating

room, but do not allow drapes or curtains to

obstruct the air flow around the unit.

4) Start your air conditioner before the

outdoor air becomes hot and uncomfortable, to

avoid an initial period of discomfort while the

unit is cooling off the room. Use of the

automatic start/stop programmable TIMER

feature can be a major asset in this regard if

utilized to the fullest extent.

5) When outdoor temperatures are cool

enough, turn the air conditioner off and use the

FAN MODE. This circulates indoor air,

providing some cooling comfort while utilizing

less electricity.

NOTE: The power cord supplied with this air

conditioner contains a current leakage

detection device designed to reduce the risk of

fire. In the event the power supply cord is

damaged, it cannot be repaired and must be

replaced with a new cord from the product

manufacturer.

• Under no circumstances should this device

be used to turn the unit on or off.

• The “RESET” button must always be pushed

in (engaged) for correct operation.

• The power supply cord must be replaced if it

fails to reset when the “TEST” button is

pushed in.

1) Connect the power supply cord to an

electrical outlet.

2) The power supply cord has two buttons

located on the head of the plug. One button is

marked “TEST”, and the other is marked

“RESET”. Press the “TEST” button; you will

hear a click as the “RESET” button pops out.

3) Press the “RESET” button; you will hear a

click as the button engages.

4) The power supply cord is now energized

and supplying electricity to the air conditioner

(on some products this is also indicated by a

light on the plug head).

IMPORTANT SAFETY INFORMATION

POWER

SUPPLY CORD

ENERGY-

SAVING TIPS

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Danby DPAC 5009 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPAC 5009