Danby DPAC 5009 Operations Instructions Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Air Conditioning Mode ONLY
Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to a
maximum height of 80” (203cm). For vertical window applications, multi lock positions are provided
on the edge of each slider section to secure each sliding section together.
1) Select a suitable location, making sure you have access to an electrical outlet.
2) Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the exhaust
opening and twist to lock into position.
3) Install the adjustable Window Slider Kit as required (see Fig. 3a & 3b).
4) Install the opposite end of the flexible exhaust hose into the window exhaust adapter.
5) Install the window exhaust adapter into the opening in the slider section, making sure the
window slider sections are secure.
6) Plug the unit into a 115V/60Hz grounded electrical outlet.
Window Slider Kit:
Min.: 26
5
/8(67.5cm)
Max.: 80” (203cm)
Window Slider Kit:
Min.: 28
1
/3(72cm)
Max.: 80” (203cm)
5
Horizontal Window
Vertical
Window
There should be at least 11.8” (30cm) clearance
between the unit and any other objects or
building structures, and should be installed on a
level surface. The unit does not have to be vented
outside during Dehumidifying or Fan Only mode
operation.
Flexible Exhaust Hose (13cm)
Exhaust nozzle connector (fix to unit, 1pc) &
Exhaust nozzle connector (fix to window kit,
1pc).....from 17
7
/10
” (45cm) to 53
1
/6
” (135cm)
Ajustable window door slider kit (3 pcs)..... from 28
1
/3”(72cm) up to 80” (203cm)
Fixture..... (1 pcs)
Screws......(4 pcs)
NOTE: The exhaust/window kit must be installed at all
times when the unit is operating under AIR
CONDITIONING mode.
ELECTRIC SHOCK HAZARD: To avoid the possibility of personal injury, disconnect power to
the unit before installing or servicing.
Back of Window Pane
Tube Adapters
Fig. 2
Instructions for Assembling the Window Adapter
Kit- Fig. 2
1) Insert tube adapters through the back of the window
panel.
2) Secure each tube adapter with four screws through
the front of the window panel.
3) Insert window panel extensions into window panel.
Lightly tighten the screws in the window panel to hold
the extensions in place.
Fig. 3a
Fig. 3b
INSTALLATION ACCESSORIES
Exhaust nozzle
Connector
Flexible Exhaust Hose
Fixture
Screws
Adjustable Window Slider Kit
28 1/3” (72cm)- 80” (203cm)
Fig. 1
INSTALLATION
WINDOW KIT
INSTALLATION
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments