Danby DPAC 5009 Operations Instructions Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
READ ALL SAFETY INFORMATION BEFORE USING
1) Check available power supply and resolve
any wiring problems BEFORE installation and
operation of this unit. All wiring must comply
with local and national electrical codes and be
installed by a qualified electrician. If you have
any questions regarding the following
instructions, contact a qualified electrician.
2) This appliance draws 5.8 nameplate amps
under Cooling Mode and may be used in any
properly wired, general purpose 15 amp
household grounded receptacle.
3) For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you are
not sure whether the wall outlets in your home
are properly grounded, please consult a
qualified electrician.
WARNING: Improper connection of the
grounding plug can result in risk of Fire,
Electric Shock, and/or injury to Persons
associated with the appliance. Check with a
qualified service representative if in doubt that
the appliance is proplery grounded.
4) DO NOT USE PLUG ADAPTERS OR
EXTENSION CORDS WITH THIS UNIT. If it is
necessary to use an extension cord with this
unit, use an approved “air conditioner”
extension cord only (available at most local
hardware stores).
5) To avoid the possibility of personal injury,
always disconnect the power supply to the unit
before installing and/or servicing.
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps *AWG Wire Size
5.8 18
AWG- American Wire Gauge
*Based on copper wire at 105°C temperature rating.
TABLE 2
Receptacle and Fuse Types
Rated Volts 125
Amps 15
Wall Outlet
Fuse Size 15
Time Delay Fuse Plug Type
(or Circuit Breaker)
3
Cool air outlet Handle Recess
On/Off
Switch
Castor
Air filter
Air intake
(evaporator)
Water Drain
outlet
Air filter
Air intake
(condenser)
Water Drain outlet
Power supply cord
Exhaust
Air outlet
PART IDENTIFICATION
IMPORTANT SAFETY INFORMATION
ELECTRICAL
SPECIFICATIONS
CAUTION: Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an
enclosed, unattended space.
Page view 3
1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments