Danby DWC276BLS Owner's Manual download pdf (Page 7)

6

Operating Instructions

1

2

3

4

Setting the

Temperature

• To switch the display

between the Fahrenheit (°F)

and Celsius (°C) scale,

depress the UP and DOWN

control buttons simultaneously for

approximately five (5) sec-

onds

• The temperature range can

be set as low as 39

°F(4°C)

or as high as 64°F (18°C) to

suit your specific wine stor-

age requirements. Each

depression of the UP or

DOWN button will allow you

adjust the temperature in 1°

degree increments within the

aforementioned range.

• You may view your ‘set’

temperature at any time by

briefly depressing either the

‘UP’ or ‘DOWN’ button. The

set temperature will flash in

the display area for 5 sec-

onds before the display

resumes showing the

current

cabinet temperature.

Please note: In the event of

a power failure or interrup-

tion, all modified settings are

lost and the default settings

are used once power

resumes.

The Controls of

you Wine Cooler

1. Run

Indicator light illuminates to signify the

cooling mode is currently in operation.

2. Electronic Display

Dislpay screen shows current cabinet

temperature and set temperature. (see

‘Setting the Temperature’ below)

3. C° / F°

Adjacent indicator light denotes which

scale of temperature is displayed.

4. ‘UP’ Button

Used to raise (warm) the temperature

in 1° degree increments.

‘DOWN’ Button

Used to lower (cool) the

temperature in 1° degree increments.

When you plug in your

wine cooler for the first

time, the temperature

will automatically be set

to 54°F (12°C) and will be

displayed in the

Fahrenheit scale (°F).

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Comments to this Manuals

No comments