Danby DPA100B2WDB Operations Instructions download pdf (Page 16)

Installation Instructions

WATER DRAINAGE

• During dehumidifying modes, remove the drain plug from the back of the

unit, install the drain connector (5/8” universal female connecter) with

3/4” hose (not included). For the models without a drain connector, just

attach the drain hose to the hole. Place the open end of the hose

directly over the drain area in your basement floor. Please refer to

Fig.22a, b & 23.

• When the water level of the bottom tray reaches a predetermined level,

the unit beeps 8 times, the digital display area shows P1. At this time

the air conditioning/dehumidification process will immediately stop.

However, the fan motor will continue to operate (this is normal).

Carefully move the unit to a drain location, remove the bottom drain plug

and let the water drain away (Fig.24). Restart the machine until the P1

symbol disappears. If the error repeats, call for service.

NOTE: When operating or draining water always protect carpeting or

floors from possible water spillage.

Remove the

drain plug

Continuous

drain hose

Fig.22a

Fig.23

Fig.24

Fig.22b

The drain

plug

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Danby DPA100B2WDB Operations Instructions Page 16