Danby DPA100B2WDB Operations Instructions download pdf (Page 13)

Installation Instructions

INSTALLATION IN A

DOUBLE- HUNG SASH

WINDOW

1. Measure the adhesive foam seal to fit the window stool. Then cut the

foam seal to the proper length and attach it to the window stool. Fig.9

2. Attach the window slider kit to the window stool. Adjust the length of

the window slider kit according to the width of window. Shorten the

adjustable window kit if the width of window is less than 28.3 inches.

Open the window sash and place the window slider kit on the window

stool. Fig.10

3. Cut the foam seal (adhesive type) to the proper length and attach it on

the top of the window. Shown in Fig.11

4. Close the window sash securely against the window.

5. Cut the foam seal to an appropriate length and seal the open gap

between the top window sash and outer window sash. Shown in

Fig.12.

Foam seal A

(adhesive type)

Fig.9

Fig.10

Window Kit

Window Stool

Fig.11

Window Kit

Window Stool

Fig.12

Foam seal

Foam seal B

28.34 ~ 81.5

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Danby DPA100B2WDB Operations Instructions Page 13