Danby DPA100B2WDB Operations Instructions download pdf (Page 10)

Operating Instructions

OPERATING MODES

COOL mode

- Press the "MODE" button until the "COOL" indicator light comes on.

- Press the up / down arrows to select your desired room temperature.

The temperature can be set within a range of 17°C-30°C / 62°F-86°F.

- Press the "FAN SPEED" button to choose the fan speed.

DRY mode

- Press the "MODE" button until the "DRY" indicator light comes on.

- Under this mode, you cannot select a fan speed or adjust the

temperature. The fan motor operates at LOW speed.

- Keep windows and doors closed for the best dehumidifying effect.

- Do not use the window hose under this mode.

AUTO mode

- When you set the air conditioner in AUTO mode, it will automatically

select cooling, heating (applicable models only) or fan only operation

depending on what temperature you have selected and the room

temperature.

- The air conditioner will adjust the room temperature automatically to

the temperature point set by you.

- Under AUTO mode, you can not select the fan speed.

FAN mode

- Press the "MODE" button until the "FAN " indicator light comes on.

TIMER mode

- To initiate the TIMER OFF function, press the timer button when the unit

is on. It indicates the Auto Stop program is initiated.

- To initiate the TIMER ON function, press the timer button when the unit

is off. It indicates the Auto Start program is initiated.

- Press and hold the UP or DOWN button to change the Auto-time by half

hour increments, up to 10 hours, then at 1 hour increments up to 24

hours. The control will count down the time remaining until the unit

starts or stops.

- The selected time will program in 5 seconds and the system will

automatically revert back to display the previous temperature setting.

- Turning the unit ON or OFF at any time or adjusting the timer setting

to 0.0 will cancel the Auto Start/Stop timed program.

- When a malfunction (E1, E2, E4, P1) occurs, the Auto Start/ Stop

program will be cancelled.

- Press the "FAN SPEED" button to choose the fan speed (1 time for LOW,

2 times for HIGH, 3 times for AUTO-FAN).

- The corresponding fan speed indicator light for each speed lights up. Both

indicators are lit up when AUTO-FAN is selected.

- The temperature cannot be adjusted.

- Do not use the window hose in this mode.

HEAT mode (select models only)

- Press the "MODE" button until the "HEAT" indicator light comes on.

- Press the ADJUST buttons "up" or "down" to select your desired

room temperature. The temperature can be set within a range of

17°C-30°C / 62°F-86°F.

- Press the "FAN SPEED" button to choose the fan speed. For some

models, the fan speed can not be adjusted under HEAT mode.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Danby DPA100B2WDB Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPA100B2WDB