Danby DPA100B2WDB Operations Instructions download pdf (Page 6)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation resulting from to ignoring these instructions may cause harm or damage.

ENERGY SAVING

TIPS

 Use the unit in the recommended room size.

 Locate the unit where furniture cannot obstruct the air flow.

 Keep blinds/curtains closed during the sunniest part of the day.

 Keep the filters clean.

 Keep doors and windows closed to keep cool air in and warm air out

(cooling mode).

OPERATING

CONDITION

The air conditioner must be operated within the temperature range

indicated below:

TOOLS FOR WINDOW

KIT INSTALLATION

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide.

Identifying Parts

WARNING

Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

 Avoid fire hazard or electric shock. Do not use an extension cord

or an adaptor plug. Do not remove any prong from the power

cord.

ELECTRICAL

INFORMATION

WARNING

 Be sure the electrical supply is adequate for the model you have

chosen. This information can be found on the serial plate, which

is located on the side of the cabinet and behind the grille.

 Be sure the air conditioner is properly grounded. To minimize

shock and fire hazards, proper grounding is important. The

power cord is equipped with a three-prong grounding plug for

protection against shock hazards.

 Your air conditioner must be used in a properly grounded wall

receptacle. If the wall receptacle you intend to use is not

adequately grounded or protected by a time delay fuse or circuit

breaker, have a qualified electrician install the proper receptacle.

 Ensure the receptacle remains accessible after the unit is

installed.

MODE

COOL

DRY

*HEAT (heat pump type)

*HEAT (electrical or heat pump)

ROOM TEMPERATURE

17°C (62°F) ~ 35°C (95°F)

13°C (55°F) ~ 35°C (95°F)

5°C (41°F) ~ 30°C (86°F)

<30°C / 86°F

(*) Optional feature, some models may not have this feature.

Note: Performance may be reduced outside of these operating

temperatures.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

Danby DPA100B2WDB Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DPA100B2WDB