Danby DMW902W User Manual download pdf (Page 10)

C.Notes on setting the clock.

•IF YOU MAKE A MISTAKE in setting the

correct time, start oven by pressing the

CLOCK pad twice.

•TO RECALL TIME OF DAY WHILE YOU

ARE COOKING, press the CLOCK pad.

Time of the day will be displayed for 3

seconds before returning to displaying the

counting down of the cooking time.

• IN CASE OF POWER FAILURE, when the

power has been restored, the control will be

in a clock set mode. Follow the directions

for setting the clock.

• BEEPS DURING OVEN SETTING ONE

BEEP: Oven accepts the entry. Information

has been entered in the correct sequence.

TWO BEEPS: Oven does not accept the

entry. Check and try again.

2.SETTING THE OVEN TIMER

A. Timer works independently of cooking and

can be set anytime for various kitchen

tasks. Use oven timer even though oven is

also timing a microwave cooking function.

Set time as follows:

•Touch the TIMER pad. Word prompts

ENTER TIMER TIME show on the display. if

you are using the TIMER while cooking in

the oven : Cooking time countdown will be

temporarily replaced on the display while

timer is being set.

• Enter the amount of time you wish to set by

touching the correct number pads. Digit time

is in minutes and seconds and set left to

right. Set one digit (a 5 for 5 seconds) or up

to four digits(2405 for 24 minutes, 5 sec-

seconds). ENTER TIMER remains on

the display.

•Touch START/STOP pad. Word prompt

TIMER starts flashing and timer begins

counting down. If you are using the TIMER

while cooking in the oven : TIMER starts

flashing and timer countdown can be seen

on display for 3 seconds before cooking

time is returned to display. Word prompt

TIMER is displayed alone with additional

word prompt indicating current

cooking mode.

B.Notes on setting the oven timer.

•TO STOP OR RESET TIMER when cook-

ing is not taking place, touch RESET pad.

• WHEN SETTING TIMER DURING A

COOKING OPERATION take care to set

timer correctly. Once the timer is set during

cooking, setting cannot be changed without

resetting the cooking function at the same

time. Touching RESET will not allow you to

change timer setting while cooking.

•When end of time has been reached, one

long beep can be heard and timer will leave

the display. If oven is not cooking, CLOCK

and time of day (if set) will return to the dis-

play. If oven is in cooking operation, one

long beep can be heard and TIMER will

leave display while oven is continuing cook-

ing time countdown.

3.SETTING THE COOKING TIME &

POWER LEVEL

A. QUICK & EASY

When cooking at 100% power, simply set

cook time by touching number pads( for

example, 3 minutes: touch 3-0-0) and

START. 100% power is automatically set.

For 1-step cooking, you do not have to

touch COOK pad before setting time.

BTO COOK AT LOWER POWER LEVELS

After setting cook time, touch POWER pad

then single digit representing the power

level desired. Touch START pad. Since

oven automatically assumes 100% power,

you must switch power level (when desired)

after setting cook time.

USE THESE SINGLE DIGITS TO

REPRESENT POWER LEVELS

Digit % of Power

9 90%

8 80%

7 70%

6 60%

5 50%

4 40%

3 30%

2 20%

1 10%

If you are cooking at a lower power level and

wish to return to 100% power, press the

POWER pad twice.

8

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

Comments to this Manuals

No comments