Danby DDW1804EW Owner's Manual download pdf (Page 7)

INSTALLATION INSTRUCTIONS

CONDENSATION STRIP

Attach the condensation strip under the work

surface of the cabinet. Ensure that the strip is ﬂ ush

with the edge of the work surface.

LEVELING INSTRUCTIONS

Ensure that the appliance is level before placing it

into the enclosure. The rear foot can be adjusted

from the front of the dishwasher by turning. Use

a ﬂ at screwdriver to adjust the front feet until the

appliance is level.

INSTALLATION BRACES

The appliance must be secured in place with the

installation braces. There are two different ways to

use the braces.

A. Normal work surface

Put the installation hook into the slot of the side

plane and secure it to the work surface with the

wood screws.

B. Marble or granite counter top

Fix the side with the screw. Place the screw covers

over the internal screws to protect them from water.

TOE KICK INSTALLATION

Install the toe kick on the bottom of the appliance.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Danby DDW1804EW Owner's Manual Page 7