Danby DDW1804EW Owner's Manual download pdf (Page 13)

FILTER SYSTEM

The ﬁ lter system removes food particles from

the wash water and traps them. It is highly

recommended to empty and clean the ﬁ lters after

every wash cycle.

To clean the ﬁ lter system:

1. Turn off the dishwasher. Turn the ﬁ lter and lift

upwards to remove the ﬁ lter system from the

appliance.

2. Rotate the ﬁ lter insert counterclockwise to

unfasten and then detach the ﬁ lter insert.

3. Rinse and clean the ﬁ lters with water and

replace them inside the appliance.

CARE & MAINTENANCE

SPRAY ARM

The spray arm can be removed from the appliance

by pulling gently upwards. Rinse the spray arm with

warm water to remove any debris that can clog the

nozzles. Replace the spray arm in the appliance by

pushing downward until it clicks into place. Ensure

that the spray arm movement is not impeded before

running another cycle.

ERROR CODES

E1: Water intake is restricted or water pressure is

too low.

E3: Malfunction of heating element

E4: Water overﬂ ow

If the appliance displays any error code, a power

reset may resolve the issue. Unplug the appliance,

wait approximately 5 minutes and then plug the unit

back in.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Danby DDW1804EW Owner's Manual Page 13