Danby DDW1804EW Owner's Manual download pdf (Page 6)

INSTALLATION INSTRUCTIONS

WIRING CONNECTION INSTRUCTIONS

Before connecting the power cable to the

dishwasher, make sure the circuit breaker is off.

In the junction box located at the front bottom right

of the dishwasher, ﬁ nd the three power wires from

the dishwasher including the grounding line.

Pass the power cable through the strain relief, and

then into the junction box.

Connect the black wire of the dishwasher to the

black wire of the power cable by inserting both into

a wire nut and then rotating the wire connector.

Connect the white wire to the white wire and the

green to the green in the same manner.

Recheck each wire to ensure it is connected correctly

and securely.

Each colored wire should be connected to the

corresponding wire of the same color.

White should be connected to white, black to black,

and green to green.

Replace the junction box cover on the dishwasher.

Recheck each wire to ensure it is connected

correctly and securely. Each coloured wire should

be connected to the corresponding wire of the same

colour.

WARNING ELECTRICAL SHOCK HAZARD

To avoid electrical shock, do not work on an

energized circuit. Doing so could result in serious

injury or death. To avoid a ﬁ re hazard, make sure

electrical work is properly installed. Only qualiﬁ ed

electricians should perform electrical work.

1. Junction box

2. Power cable

3. Black to black

4. White to white

5. Green to green (ground to ground)

6. Strain relief

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

Danby DDW1804EW Owner's Manual Page 6