Danby DWC040A2BDB User Manual download pdf (Page 8)

INSTALLATION INSTRUCTIONS

DOOR SWING

REVERSAL

Phillips #2 screwdriver and an adjustable wrench.

TOOLS REQUIRED

WARNING

To reduce the risk of ﬁ re, burns, electric

shock, or injury to persons when using

your appliance, follow basic precautions,

including the following sections below;

Fig.1

Fig.2

Fig.4

Fig.5

Fig.3

Fig.6

Rubber screw covers

Screws

Decorative cover

Screws

Top hinge

Plug

Screws

Lower hinge

Cabinet leg

Extrusion-board for

lamp switch

Screws

1. Close the door and remove rubber screw covers (1), unscrew two screws (2) and remove decorative cover (3). (Fig.1)

2. Unscrew screws (4) and take out top hinge (5), then remove the door. (Fig. 2)

3. Put door aside safely, take out 2 screws (11) at bottom, pull out extrusion-board for lamp switch (10) and reattach it at the

top of the door.(Fig. 5)

4. Pull out plugs (6) from left top of cabinet. (Fig.4)

5. Unscrew 3 screws (7) from right bottom of cabinet and remove lower hinge (8). (Fig.5)

6. Unscrew cabinet leg (9) from left bottom of cabinet and ﬁ x it onto right bottom of cabinet. (Fig.5)

7. Fix the lower hinge (8) onto left bottom of cabinet with screws (7). (Fig. 5)

8. The door revolves 180 degrees, put lower door axis to aim at lower hinge (8) and install the door onto lower hinge (8), then

close the door carefully. (Fig.3)

9. Fix top hinge (5) onto left top of cabinet with screws (4), adjust door and install decorative cover (3) and rubber

cover (1). (Fig.6)

10. Block 3 screw holes at right top of cabinet with spare plugs.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

Danby DWC040A2BDB User Manual Page 8