Danby DWC2727BLS User Manual download pdf (Page 7)

6

Operating Instructions

1

2

3

4

Setting the

Temperature

• To switch the display

between the Fahrenheit (°F)

and Celsius (°C) scale,

depress the UP and DOWN

control buttons simultaneously for

approximately five (5) sec-

onds

• The temperature range for

both compartments can be set

as low as 39°F(4°C) or as

high as 64°F (18°C) to suit

your specific wine storage

requirements. Each depres-

sion of the UP or DOWN but-

ton will allow you adjust the

temperature in 1° degree

increments within the afore-

mentioned range.

• You may view your ‘set’ tem-

perature at any time by briefly

depressing either the ‘UP’ or

‘DOWN’ button. The set tem-

perature will flash in the dis-

play area for 5 seconds before

the display resumes showing

the current cabinet tempera-

ture.

Please note: In the event of a

power failure or interruption,

all modified settings are lost

and the default settings are

used once power resumes.

The Controls of

your Wine Cooler

1. Run

Indicator light illuminates to signify the

cooling mode is currently in operation.

2. Electronic Display

Dispay screen shows current cabinet

temperature and set temperature (see

‘Setting the Temperature’ below).

3. °C / °F

Adjacent indicator light denotes which

scale of temperature is displayed.

4. ‘UP’ Button

Used to raise (warm) the temperature

in 1° degree increments.

‘DOWN’ Button

Used to lower (cool) the

temperature in 1° degree increments.

When you plug in your

wine cooler for the first

time, the temperatures

will automatically be set

to 45°F (7°C) and 54°F

(12°C) in the left and right

compartments respectively

and will be displayed in

the Fahrenheit scale (°F).

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Comments to this Manuals

No comments