Danby DWC2727BLS User Manual download pdf (Page 11)

Before You Call For Service

If none of the above rectify the situation please contact our customer care department

at 1-800-26- (1-800-263-2629)

Trouble Shooting

Problem Possible Cause What to do

No Power. A fuse in your home may Replace fuse or reset circuit breaker.

be blown or the circuit

breaker tripped.

Power surge. Unplug the wine cooler, wait a few

seconds and then plug it back in.

Plug not fully inserted into Make sure the 3-prong plug on the

wall outlet wine cooler is fully inserted into outlet.

Cabinet Temperature Temperature setting Verify the temperature control setting.

too High adjust if neccessary.

Door(s) not shut properly Ensure that the doors are fully closed

or opened excessively and that the gaskets are sealing,

against the cabinets. Open the doors

only as needed and for short periods

of time.

Exhaust vent is obstructed Verify there is nothing blocking the

front mounted exhausting vent.

Recently added a large Limit the quantity of warm bottles

quantity of warm bottles being introduced to the cabinet at the

to the cabinet same time. Attempt to phase in the

load introduction if possible. (i.e. load

no more than 6 warm bottles at once-

3 per compartment)

“Clicking” Noise Normal sound No user intervention is required as

this sound is normal during the opera

tion of the appliance. This audible

‘clicking’ noise may be heard as the

wine cooler ends or begins a cooling

cycle.

Condensation on the High humidity conditions The condensation will subside once

cabinet and/or doors in the home. humidity conditions return to normal.

Door(s) not shut properly Ensure that the doors are fully closed

or opened excessively and that the gaskets are sealing.

against the cabinets. Open the doors

only as needed and for short periods

of time.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

No comments

Danby DWC2727BLS User Manual Page 11