Danby DFF092C1WDB Manual download pdf (Page 5)

DOOR AND HINGE REMOVAL

1. Unplug refrigerator or disconnect power.

2. Keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door

magnets to hold the doors in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door from the cabinet.

4. Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free

from the cabinet.

5. Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

DOOR REVERSAL CABINET

1. Remove the cover of upper hinge hole from left side and move them to opposite side (see Graphic 1).

2. Remove hole plugs from left side and move them to opposite side (see Graphic 2)

Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the

right side. In order to reverse the opening direction of your door, please follow these simple instructions:

IMPORTANT

Before you begin, unplug refrigerator or disconnect power. Remove food

and any adjustable door or utility bins from doors.

DOOR REVERSAL

INSTRUCTIONS

INSTALLATION INSTRUCTIONS

DOORS

1. Remove door hinge hole plug from the top of freezer and refrigerator door (see graphic 4)

2. Remove the door stop from refrigerator door and move to the other side (see graphic 5)

3. Take out the left door stop of freezer door and screw from the accessory bag and fix it on the handle

(see graphic 3)

NOTE: The left door and the right door stop of the freezer door are different. They can’t replace each other.

DOOR AND HINGE REPLACEMENT

1. Replace the parts for the bottom hinge as shown (see Bottom Hinge graphic). Tighten screws. Replace the

refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door

magnets to hold the doors in place while you are working.

2. Assemble the parts for the center hinge as shown and tighten all screws (see Center Hinge graphic). Replace

the freezer door.

3. Assemble the parts for the top hinge as shown (see Top Hinge graphic). Do not tighten screws completely.

4. Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door.

Tighten all screws.

1 2 3 4 5 6 7 8 9 10 ... 31 32

No comments

Danby DFF092C1WDB Manual Page 5