Danby DPF073C1WDB Manual download pdf (Page 7)

Installation Instructions

1. Select a place with a strong, level ﬂ oor.

2. Allow 5 inches of space between the back of the refrigerator and any adjacent wall.

3. Avoid direct sunlight and heat. Direct sunlight could damage the unit. Heat sources nearby will cause higher electrici-

ty consumption.

4. Avoid moist places. Too much moisture in the air will cause frost to form very quickly on the evaporator, and your

refrigerator will have to be defrosted more frequently.

To avoid vibration, the unit must be set level. This is accomplished by adjusting the front leveling leg, located under the

refrigerator.

LOCATION

Remove exterior and interior packaging, wipe the outside thoroughly with a soft dry cloth and the inside with a luke-

warm, wet cloth. Avoid placing the unit in a narrow recess or near any heat source, direct sunlight or moisture. Let air

circulate freely around the unit. Keep the rear of the refrigerator 5 inches away from the wall.

Place the appliance ﬁ rmly on a solid base. This appliance has adjustable feet on the front side; use them to level the

appliance.

NOTE: This appliance is intended for FREE-STANDING INSTALLATION ONLY, and is NOT intended to be built-in.

This appliance is approved for INDOOR USE ONLY and is NOT intended for outdoor operation.

INSTALLATION

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Danby DPF073C1WDB Manual Page 7