Danby DPF073C1WDB Manual download pdf (Page 8)

Operating Instructions

TEMPERATURE SELECTION

• The ﬁ rst time you turn the unit on, set the temperature control to “7,” the coolest

setting.

• The range of temperature controls are from position “OFF,” or NO COOLING to “7,”

the coldest. After 24 hours, adjust the temperature control to the setting that best

suits your needs. The setting of “4” should be sufﬁ cient for home or ofﬁ ce refriger-

ator use.

Note:

• If the unit is unplugged, has lost power, or has been turned off, you must wait 3 to

5 minutes before restarting the unit. If you attempt to restart before this time delay,

the refrigerator will not start.

• Turning the refrigerator temperature control to the “OFF” position stops the cooling

cycle but does not shut off the power to the unit.

• Unplug the AC power cord from the wall.

• Remove the screw that holds the light bulb cover.

• Squeeze the tabs at the top and bottom of the light bulb cover simultaneously.

• Remove the light bulb cover.

• Make sure the light bulb is cool before removing.

• Unscrew the bulb

• Replace with a 10 watt bulb that is the same shape and size.

• Replace the light bulb cover.

BULB REPLACEMENT

FEATURES

1. Freezer Shelf

2. Freezer Door

3. Thermostat Control

4. Refrigerator Shelves

5. Crisper Cover

6. Crisper

7. Leveling Legs

8. Egg Tray

9. Refrigerator Door Bin

10. Lower Door Bin

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Danby DPF073C1WDB Manual Page 8