Danby DPF073C1WDB Manual download pdf (Page 10)

DOOR REVERSAL INSTRUCTIONS

CAUTION

To avoid personal injury to yourself and/or property, we recom-

mend someone assist you during the door reversal process.

Operating Instructions

Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the right side. In

order to reverse the opening direction of your door, please follow these simple instructions:

Door and Hinge Removal

1. Unplug refrigerator or disconnect power.

2. Keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to

hold the doors in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door from the cabinet.

4. Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the

cabinet.

5. Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Door Reversal Cabinet

1. Remove the cover of upper hinge hole from left side and move them to opposite side.

2. Remove hole plugs from left side and move them to opposite side.

Doors

1. Remove door hinge hole plug from the top of freezer and refrigerator door.

2. Remove the door stop from refrigerator door and move to the other side.

3. Take out the left door stop of freezer door and screw from the accessory bag and ﬁ x it on the handle.

Note: The left door and the right door stop of the freezer door are different. They can’t replace each other.

Door and Hinge Replacement

1. Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to

hold the doors in place while you are working.

2. Assemble the parts for the center hinge as shown and tighten all screws. Replace the freezer door.

3. Assemble the parts for the top hinge as shown. Do not tighten screws completely.

4. Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all

screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are in place.

2. Plug in refrigerator or reconnect power.

3. Reset the controls (see “temperature control” section).

4. Return all removable door parts to doors and food to product.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

Danby DPF073C1WDB Manual Page 10