Danby DPA110CB5BP User Manual download pdf (Page 19)

Troubleshooting

Occasionally, a minor problem may arise, and a service call may not be necessary- use this troubleshooting guide for

a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free

Number for assistance.

Tel: 1-800-26- (1-800-263-2629)

PROBLEM POSSIBLE CAUSE SOLUTION

Unit does not start when press-

ing on/off button

• P1 appears in the display

window

• Room temperature is lower

than the set temperature.

(Cooling mode)

• Drain the water in the bottom

tray

• Reset the temperature

Not cool enough • The windows or doors in the

room are not closed

• There are heat sources inside

the room

• Exhaust air hose is not con-

nected or blocked

• Temperature setting is too

high

• Air ﬁ lter is blocked by dust

• Make sure all the windows

and doors are closed

• Remove the heat sources if

possible

• Connect the hose and make

sure it can function properly

• Decrease the set temperature

• Clean the air ﬁ lter

Noisy or vibration • The ground is not level or not

ﬂ at enough

• Place the unit on a ﬂ at, level

ground if possible

Gurgling sound • The sound comes from the

ﬂ owing of the refrigerant

inside the air conditioner

• It is normal

DISPOSAL

Check for local regulatory compliance regarding the approved and safe disposal of this appliance.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

Danby DPA110CB5BP User Manual Page 19

Comments to this Manuals

Related products and manuals for Conditioners Danby DPA110CB5BP