Danby DPA110CB5BP User Manual download pdf (Page 17)

Remove the

upper drain

plug

Continuous

drain hose

Fig.20

Fig.23

Fig.21 Fig.22

Installation Instructions

WATER DRAINAGE

• During dehumidifying modes, remove the upper drain plug from the back of

the unit, install the drain connector (5/8” universal female connecter) with 3/4”

hose (not included). For the models without a drain connector, just attach the

drain hose to the hole. Place the open end of the hose directly over the drain

area in your basement ﬂ oor. Please refer to Fig. 20.

NOTE: Make sure the hose is secure so there are no leaks. Direct the hose

toward the drain, making sure that there are no kinks that will stop the water

from ﬂ owing. Place the end of the hose into the drain and make sure the end

of the hose is down to let the water ﬂ ow smoothly. (see Fig. 20). Never raise

it. (See Fig 21, 22).

• When the water level of the bottom tray reaches a predetermined level,

the unit beeps 8 times, the digital display area shows P1. At this time the air

conditioning/dehumidiﬁ cation process will immediately stop/ However, the

fan motor will continue to operate (this is normal). Carefully move the unit to

a drain location, remove the bottom drain plug and let the water drain away

(Fig. 23). Restart the machine until the P1 symbol disappears. If the error

repeats, call for service.

NOTE: When operating or draining water, always protect carpeting or ﬂ oors

from possible water spillage.

NOTE: Be sure to reinstall the bottom drain plug before using the unit.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

No comments

Danby DPA110CB5BP User Manual Page 17