Danby DPA110CB5BP User Manual download pdf (Page 11)

Operating Instructions

OPERATING MODES

COOL mode

- Press the “MODE” button until the “COOL” indicator light comes on.

- Press the UP or DOWN arrow buttons to select your desired

room temperature. The temperature can be set within a range of

17°C-30°C / 62°F-86°F.

- Press the “FAN SPEED” button to choose the fan speed.

AUTO mode

- When you set the air conditioner in AUTO mode, it will automatically select cool-

ing, or fan only operation depending on what temperature you have selected and

the room temperature.

- The air conditioner will adjust the room temperature automatically to the tem-

perature point set by you.

- Under AUTO mode, you can not select the fan speed.

FAN operation

- Press the “MODE” button until the “FAN” indicator light comes on.

- Press the “FAN SPEED” button to choose the fan speed (1 time for LOW,

2 times for MEDIUM, 3 times for HIGH, 4 times for AUTO-FAN).

- The corresponding fan speed indicator light for each speed lights up. All

three indicators are lit up when AUTO-FAN is selected.

- The temperature cannot be adjusted.

- Do not use the window hose in this mode.

TIMER operation

- To initiate the “Auto-stop” program: When the unit is on, press the Timer

button, the TIMER OFF indicator light will illuminate.

- To initiate the “Auto-start” program: When the unit is off, press the Timer

button, the TIMER ON indicator light will illuminate.

- Press or hold the “UP” or “DOWN ” buttons to change the Auto-time by

0.5 hour increments, up to 10 hours, then by 1 hour increments up to 24

hours.The control will count down the time remaining until the unit starts.

- The selected time will register in 5 seconds and the system will

automatically revert back to display the previous temperature setting.

- Turning the unit ON or OFF at any time or adjusting the timer setting

to 0.0 will cancel the Auto Start/Stop timed program.

- When a malfunction (E1,E2,E3, E 4 or P1) occurs, the Auto Start/Stop

timed program will also be cancelled.

SLEEP function

Simply press the sleep button. When in cooling mode, the temperature will

increase by 1°C / 2°F every half our for 1 hour. The unit will then hold this new

temperature for several hours before returning to the original temperature setting

and resuming normal operation.

NOTE: This feature is unavailable in FAN and DRY mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments

Danby DPA110CB5BP User Manual Page 11

Comments to this Manuals

Related products and manuals for Conditioners Danby DPA110CB5BP