Danby DPA110CB5BP User Manual download pdf (Page 13)

Installation Instructions

LOCATION

• The air conditioner should be placed on a ﬁ rm foundation to minimize noise

and vibration. For safe and secure positioning, place the unit on a smooth, level

ﬂ oor strong enough to support the unit.

• The unit has casters to aid placement, but it should only be rolled on smooth,

ﬂ at surfaces. Use caution when rolling on carpeted surfaces. Use caution and

protect ﬂ oors when rolling over wood ﬂ oors. Do not attempt to roll the unit over

objects.

• The unit must be placed within reach of a properly rated grounded socket.

• Never place any obstacles around the air inlet or outlet of the unit.

• Allow at least 30 cm of space away from the wall for efﬁ cient air conditioning.

WINDOW SLIDER KIT

INSTALLATION

Your window slider kit has been designed to ﬁ t most standard vertical and hori-

zontal window applications, however, it may be necessary for you to modify some

aspects of the installation procedures for certain types of windows. Please refer to

Fig. 6 and Fig. 7 for minimum and maximum window openings. The window slider

kit can be fastened with a screw (see Fig. 8)

NOTE: If the window opening is less than the mentioned minimum length of the

window slider kit, cut the end without the hole in it short enough to ﬁ t in the window

opening. Never cut out the hole in window slider kit (visit www.danby.com for

general instruction videos).

Fig.5 Fig.6

Fig.7

Vertical

Window

Window Slider Kit

Minimum:72.0cm(2.36ft).

Maxmum:207.0cm(6.79ft).

Horizontal

Window

Window Slider Kit

Minimum:72.0cm(2.36ft).

Maxmum:207.0cm(6.79ft).

Fig.8

Screw

Window

slider

kit

Patio kit

Pins

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Danby DPA110CB5BP User Manual Page 13