Danby DWC153BLSST Owner's Manual download pdf (Page 12)

Problem Possible Cause What to do

be blown or the circuit

Plug not fully inserted into Make sure the 3-prong plug is fully

Cabinet Temperature Temperature setting Verify the temperature control setting.

Door not shut properly Ensure that the door is fully closed

Exhaust vent is obstructed Verify there is nothing blocking the

Recently added a large Limit the quantity of warm bottles

quantity of warm bottles being introduced to the cabinet at the

to the cabinet same time. Attempt to stagger the

Condensation on the High humidity conditions The condensation will subside once

Door not shut properly Ensure that the door is fully closed

the cabinets. Open the door only as

too High

or opened excessively and that the gasket is sealing against

the cabinets. Open the door only as

or opened excessively and that the gasket is sealing against

breaker tripped

Power surge Unplug the Wine Cooler, wait a

No Power. A fuse in your home may Replace fuse or reset circuit breaker

few seconds and then plug it back in

wall outlet inserted into outlet

Adjust if neccessary

needed and for short periods of time

front

mounted exhausting vent

load introduction if possible

cabinet and/or doors in the home. humidity conditions return to normal

needed and for short periods of time

Occasionally, a problem is minor and a service call may not be necessary - use this

authorized service depot or Danby's Toll Free Number 1-800-263-2629.

Troubleshooting

troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

No comments

Danby DWC153BLSST Owner's Manual Page 12