Danby DBD5L Owner's Manual download pdf (Page 12)

CONNECTING THE BEVERAGE DISPENSER

Preparing A Standard 5 Liter Mini Keg (cont’d)

USING THE YELLOW ADAPTER (continued)

CONNECTING THE MINI KEG TO THE

DISPENSER

13. Insert the 5 liter mini keg (with the ADAPTER

connected)

into the dispenser. Insert the YELLOW MALE

CONNEC

TOR attached to the AIR-CONNECT TUBE into

the

AIR IN opening of the YELLOW ADAPTER

(See

Figure 6

). Make sure you hear a “locking click”

. Take the YELLOW MALE CONNECTOR attached to the

DISPENSING

TUBE and insert that end into the

BEVERAGE OUT opening of the YELLOW ADAPTER

(See

Figure 6

). Make sure you hear a “locking click”

. Make sure there are no kinks in the TUBES. There

needs

to be an even air flow from the unit to the keg and

even liquid flow from the keg to the tap. Also make sure the

keg is centered in the cooling compartment of the unit. This

ensures

even cooling throughout.

TURNING ON THE AIR PRESSURE

16. Before closing the lid of the dispenser, you need to turn

the air pressure which will generate the power to

dispense

the beverage.

. In the upper left hand corner of the under side of the

lid,

there is a black switch, labeled AIR ON or AIR OFF,

which

can be moved up or down. Move the switch to the

AIR ON position (See

Figure 7

). Once you close the lid the

power will be activated to turn the air pressure on.

. When the dispenser is not being used, make sure the

switch is in the AIR OFF position.

CLOSE THE LID

To turn on the power, please refer to “

Switching on the

Power

” on page 15

Figure 6

Figure

To connect dispensing tube to

Yellow adapter

PUSH

UNTIL

LOCKING

CLICK

AIR ON/OFF

SWITCH

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comments to this Manuals

No comments

Danby DBD5L Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Water dispensers Danby DBD5L