Danby DBD5L Owner's Manual download pdf (Page 11)

OPEN

CONNECTING THE BEVERAGE DISPENSER

Preparing A Standard 5 Liter Mini Keg (cont’d)

USING THE YELLOW ADAPTER (continued)

DISPENSING TUBE FOR YELLOW ADAPTER

The DISPENSING TUBE will be pre-assembled, but if

assembling is required please follow these instructions:

DISPENSING TUBE WITH BLACK STOPPER

YELLOW MALE CONNECTOR

METAL CLIP

8. Place the CLIP over the end of the DISPENSING TUBE

9. Insert the YELLOW MALE CONNECTOR into the

opening of the end with the CLIP. Attach the CLIP so it

seals the MALE CONNECTOR into place under the TUBE.

(See

Figure 4

)

10. When finished, take the other end of the DISPENSING

TUBE (the side with nothing attached) and insert it into the

opening of the tap. (See

Figure 5

)

11. Pull the TAP HANDLE down so the DISPENSING TUBE

fits through the tap. To do this, you may have to push and

thread it through. Make sure the BLACK STOPPER fits

securely in the inlet just before entering the tap.

(See

Figure 5

)

12. The DISPENSING TUBE needs to go all the way

through the spout. The TUBE should be slightly exposed

below the bottom of the tap. (See

Figure 5

)

Figure 4

Figure 5

BLACK STOPPER

TUBE IS

EXPOSED

YELLOW MALE CONNECTOR

DISPENSING TUBE

Attach METAL CLIP so it seals

MALE CONNECTOR in place

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Comments to this Manuals

No comments

Danby DBD5L Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Water dispensers Danby DBD5L