Danby DWM5500W User Manual download pdf (Page 14)

OPERATING INSTRUCTIONS

Instructions for Use

13

Water plus Switch

Washing under programs for regular

laundry (programs A and B) is carried out

with a low water level; the quantity of water

is automatically adjusted to the amount of

laundry. This guarantees successful and

economic washing, regardless of the amount of

laundry.

When washing heavily soiled laundry the

water level can be increased by pressing this

switch.

It is impossible to change the water level in

programs for delicate linens and woolens.

Extra Rinse Switch

All washing programs are designed for

optimum water usage, during both washing

and rinsing cycles.

If you are allergic to washing agents, use the

extra rinsing cycle. This switch is operating only

with the programs for regular laundry (A-F) and

can be switched on at the beginning of the wash

program or prior to rinsing.

Prepare your machine for washing

− Select laundry and load a suitable amount.

− Close the door (push it towards the machine).

− Fill the dispenser (in the correct sections).

− Check water inlet and outlet.

− Choose the right program.

− If your machine is equipped with switches, use

them, as appropriate.

− Select the washing temperature and spinning

speed, if your washing machine is equipped

with this option.

− Switch the machine on.

After Washing

− Switch off the machine (the control lamp turns

off).

− Check that the washing is finished and that

water is pumped out of the machine to avoid

unnecessary flooding. If there is still water in

the machine, select one of the programs for

pumping or spinning.

− Some two minutes after the washing is finished

you can open the door.

− Take the laundry out of the machine and turn

the drum once or twice by hand to make sure

no articles remain inside .

− Check the rubber gasket on the door and

remove objects that might have deposited

(buttons, pins..) (fig. 14).

− Leave the door open and allow the interior to

dry.

− Disengage any pushbuttons you used.

− Close the water taps.

− Check the dispenser and clean if necessary

and dry it well.

− Check and clean the lint filter regularly.

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Comments to this Manuals

No comments