Danby DFG58D1BSS Owner's Manual download pdf (Page 11)

Danby Consumer Care: 1-800-263-2629

Hours of operation:

Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time

Friday 8:30 am - 4:00 pm Eastern Standard Time

Information in this manual is subject to change without notice.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE

No power • A fuse may be blown or the circuit breaker tripped

• Plug not fully inserted into the wall outlet

Alarm sounding and “HI” on the display • Internal temperature is higher than 32°C (90°F)

Alarm sounding and “LO” on the display • Internal temperature is lower than 17°C (63°F)

CARE & MAINTENANCE

CLEANING

Ensure the appliance is unplugged before cleaning.

• To clean the inside of the appliance, use a soft

cloth and a solution of a tablespoon of baking

soda to one quart of water or some mild

detergent.

• Clean the outside with a soft, damp cloth and

some mild detergent.

Note: Do not use cleaners containing ammonia or

alcohol on the appliance. Ammonia or alcohol can

damage the appearance of the appliance. Never

use any commercial or abrasive cleaners or sharp

objects on any part of the appliance.

VACATION

It is not advisable to leave the appliance running

during a vacation. Plants require daily watering

and monitoring to ensure they do not overheat or

dehydrate. Be sure to empty, turn off and unplug the

appliance before leaving for vacation.

ERROR CODES

The appliance may emit an alarm and display an

error code on the display screen. This is generally

due to temperatures inside the cabinet being too

high or too low. High temperatures can dehydrate

and burn plants. Low temperatures can freeze

plants and stunt growth.

Error Code “HI”

An alarm will sound and the error code “HI”

will appear on the display when the internal

temperature of the appliance is higher than 32°C

(90°F) for more than 10 minutes. If the temperature

inside the cabinet drops below 30°C (86°F) for

more than 5 minutes, the alarm and error will stop

and the appliance will resume normal functioning.

Press any key on the control panel to silence the

alarm.

Error Code “LO”

An alarm will sound and the error code “LO”

will appear on the display when the internal

temperature of the appliance is lower than 17°C

(63°F) for more than 10 minutes. If the temperature

inside the cabinet rises above 19°C (66°F) for more

than 5 minutes, the alarm and error will stop and

the appliance will resume normal functioning. Press

any key on the control panel to silence the alarm.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments

Danby DFG58D1BSS Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Unknown Danby DFG58D1BSS