Danby DFG58D1BSS Owner's Manual download pdf (Page 8)

OPERATING INSTRUCTIONS

SETTING THE CLOCK

When the appliance is ﬁ rst plugged in, the display

will ﬂ ash until the clock is set with the current local

time.

The ﬁ rst two digits on the display screen will ﬂ ash.

Press the light on or light off buttons to set the

correct hour. Press the clock button to conﬁ rm the

selection.

The second two digits on the display screen will

ﬂ ash. Press the light on or light off buttons to set the

correct minute. Press the clock button to conﬁ rm the

selection.

To change the current time, press and hold the clock

button for 3 seconds. When the ﬁ rst two digits on

the display start to ﬂ ash, use the steps above to reset

the current time.

The hour range can be set between 0 - 23. The

minute range can be set between 0 - 59.

SETTING THE LIGHT TURN ON TIME

Press and hold the light on button for three seconds

until the N indicator light is ﬂ ashing.

The ﬁ rst two digits on the display screen will ﬂ ash.

Press the light on or light off buttons to set the

desired hour that the lights should turn on. Press the

clock button to conﬁ rm the selection.

The second two digits on the display screen will

ﬂ ash. Press the light on or light off buttons to set the

desired minute that the lights should turn on. Press

the clock button to conﬁ rm the selection.

Press the light on button once to display the current

light on setting. The display will return to the current

time after 3 seconds.

The hour range can be set between 0 - 23. The

minute range can be set between 0 - 59.

SETTING THE LIGHT TURN OFF TIME

Press and hold the light off button for three seconds

until the F indicator light is ﬂ ashing.

The ﬁ rst two digits on the display screen will ﬂ ash.

Press the light on or light off buttons to set the

desired hour that the lights should turn off. Press the

clock button to conﬁ rm the selection.

The second two digits on the display screen will

ﬂ ash. Press the light on or light off buttons to set the

desired minute that the lights should turn off. Press

the clock button to conﬁ rm the selection.

Press the light off button once to display the current

light off setting. The display will return to the current

time after 3 seconds.

The hour range can be set between 0 - 23. The

minute range can be set between 0 - 59.

When ﬁ nished settling the light turn off time, the R

N F indicator lights illuminate to signify that light

running mode is currently in operation.

SETTING THE RUNNING CYCLE

The running cycle determines how many days

the lights will cycle on and off once they are

programmed. The default value is 0, meaning the

lights will only complete the programming cycle

once.

Press and hold the light on and light off buttons at

the same time for three seconds until the R indicator

light is ﬂ ashing.

The ﬁ rst two digits on the display screen will ﬂ ash.

Press the light on or light off buttons to set the

desired number of days that the cycle should run.

Press the clock button to conﬁ rm the selection.

The running cycle can be set between 1 - 60 days.

After a maximum of 60 days, the lights will return to

default programming and the running cycle must be

reset.

When ﬁ nished setting the running cycle, “End” will

show on the display screen.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

Danby DFG58D1BSS Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Unknown Danby DFG58D1BSS