Danby DFG58D1BSS Owner's Manual download pdf (Page 10)

DOOR REVERSAL INSTRUCTIONS

If the default door opening on the appliance is

inconvenient, follow the steps below to change the

direction of the door swing.

1. Remove the two screws that secure the hinge

axis to the lower right hinge. Slide the door

outward from the bottom to remove it from the

upper right hinge.

2. Remove the upper right hinge from the cabinet.

3. Remove the screw hole covers from the upper

left side of the cabinet and install the upper left

hinge. Place the screw hole covers in the screw

holes on the upper right side of the cabinet.

4. The lower left hinge is pre-installed on the

cabinet. The lower right hinge does not need to

be removed.

5. To reinstall the door, it must be ﬂ ipped 180°

from its original position. Install the door by

sliding it onto the top hinge pin, then replace

the door axis by placing the hinge pin in the

bottom of the door and securing it to the lower

left hinge.

1. Lower right hinge

2. Axis screws

3. Hinge axis

4. Upper right hinge

5. Hinge screws

6. Upper left hinge

7. Lower left hinge

OPERATING INSTRUCTIONS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Danby DFG58D1BSS Owner's Manual Page 10