Danby DAC15009EE Operations Instructions download pdf (Page 5)

ELECTRICAL SPECIFICATIONS

1) All wiring must comply with local and national electrical

codes and must be installed by a qualified electrician.If

you have any questions regarding the following

instructions, contact a qualified electrician.

2) Check available power supply and resolve any wiring

problems BEFORE installing and operating this unit.

3) This 115V or 230/208V air conditioner uses 12 or less

nameplate amps and may be used in any properly wired,

general purpose household receptacle. See

Table 1 for

specifications for individual branch circuit.

4) For your safety and protection, this unit is grounded

through the power cord plug when plugged into a

matching wall outlet. If you are not sure whether your

wall outlet is properly grounded, please consult a

qualified electrician.

5) The wall outlet must match the 3-prong plug on the

service cord supplied with the unit. DO NOT use plug

adapters. See Table 2 for receptacle and fuse

information. If it is necessary to use an extension cord to

connect your air conditioner, use an approved “air

conditioner” extension cord only (available at most

local hardware stores).

6) The rating plate on the unit contains electrical and other

technical data. The rating plate is located on the right

side of the unit, above the power cord.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps *AWG Wire Size

4112 or less

AWG- American Wire Gauge

*Based on copper wire at 105°C temperature rating.

TABLE 2

Recept

Model

DAC150EB1GDB DAC180EB1GDB DAC250EB1GDB

and Fuse Types

stloV detaR

spmA

Wall Outlet

eziS esuF

epyT gulPesuF yaleD emiT

(or Circuit Breaker)

Do not, under any

circumstances, cut,

remove, or bypass

the grounding prong.

ENERGY SAVING TIPS

Your Danby appliance is designed to be highly efficient in energy savings. Follow these recommendations for

greater efficiency.

1) Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2) The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times. (Usually cleaned every

2 weeks depending on indoor air quality).

3) Use drapes, curtains or shades to keep direct sunlight from penetrating and heating the room, but do not allow drapes

or curtains to obstruct the air flow around the unit.

4) Start your air conditioner before the outdoor air becomes hot and uncomfortable, to avoid an initial period of

discomfort while the unit is cooling off the room. Use of the automatic start/stop programmable TIMER feature can be

5) When outdoor temperatures are cool enough, use the FAN MODE only, on HIGH, MEDIUM, or LOW setting. This circulates

indoor air, providing come cooling comfort, and utilizes less electricity than when operating on a cooling setting.

IMPORTANT SAFETY INFORMATION

042 052521

51 0351

51 0251

a major asset in this regard if utilized to the fullest extent.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments

Danby DAC15009EE Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Split-system air conditioners Danby DAC15009EE