Danby DPAC 9009 User Manual download pdf (Page 11)

CARE AND MAINTENANCE

CAUTION: Before cleaning or servicing this unit, disconnect from any electrical supply outlet.

1) DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as

these substances may cause damage to the finish and deformation of plastic parts.

2) Never attempt to clean the unit by pouring water directly over any of the surface areas, as

this will cause deterioration of electrical components and wiring insulation.

3) Unplug the unit.

4) Clean the unit by wiping off any dirt/dust with a soft damp cloth or vacuum cleaner, then

wipe dry with a dry soft cloth.

CAUTION: Always store the unit in vertical position. DO NOT put heavy objects on top of the

unit.

CLEANING

THE UNIT

CLEANING

THE AIR FILTER

If the air filter becomes clogged with dust/dirt, air

flow is restricted, which reduces cooling efficiency.

The air filter should be cleaned every two (2)

weeks. More frequent cleaning may be necessary

depending on indoor air quality.

NOTE: The air filter is located at the upper rear

side of the unit.

1) To remove the air filter: Pull the air filter cover

upward in the direction of the arrow (Fig.4) and

remove the air filter.

2) Dust/dirt clogged in the filter can be removed by

vacuum cleaning the soiled areas.

3) The filter can also be washed in lukewarm,

soapy water while rubbing it lightly with a brush. A

mild detergent (diswashing liquid) is recommended.

4) Rinse the filter well using clean water. Allow

time to dry before reinstalling into the unit.

5) Replace the air filter and cover.

6) Replacement air filter information is available by

contacting the Customer Service Department at:

1-800-26-

1-800-263-2629

CAUTION: Never operate this unit without the air filter in

place, as this may result in damage to the unit.

Fig. 4

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Danby DPAC 9009 User Manual Page 11