Danby DFF501WDD User Manual download pdf (Page 6)

Reverse Door (optional on some models)

IMPORTANT: If you want to reverse your door so that it opens in

the opposite direction, continue with “Reverse Door (optional)”

instructions. If you are not reversing the door, see “Replace Door

and Hinges.”

Cabinet

1. Remove the cabinet hinge hole plugs from the cabinet top and

move them to the opposite side hinge holes as shown in

Graphic 2.

2. Remove the door stop screws from the Bottom Hinge bracket.

See Bottom Hinge Graphic 1C.

3. Remove the Hinge Pin Nut and Hinge Pin from the hinge

bracket.

4. Rotate the hinge bracket for installation on the opposite side

of the cabinet. See Graphic 3.

5. Reinstall the Hinge Pin Nut and Hinge Pin to the hinge

bracket. Hinge Pin must point “up” when hinge bracket is

installed to the cabinet.

6. Invert the door stop so that the countersunk holes line up with

the screw holes in the hinge assembly. See Graphic 4.

7. Reinstall the door stop screws. See Graphic 3.

8. Reinstall the hinge assembly to the cabinet with the three

hex-head hinge screws.

Handle

Move the door handle from one side of the door to the other.

Style 1

1. Loosen setscrews located on side of handle at each end. See

Graphic 1-1.

2. Remove handle from grommets.

3. Using a ¹⁄₄" hex head socket wrench, remove the grommets

from the door.

4. Position the grommets on the opposite side of the door and

reinstall.

5. Position the handle over grommets on the opposite side of the

refrigerator door.

6. Ensure grommets are fitted into handle holes.

7. Tighten the upper and lower setscrews with hex key provided.

Do not overtighten setscrews.

Style 2

1. Slide the handle up and off the clips. See Graphic 1-2.

2. Using a flat-blade screwdriver, remove the screws from the

clips and remove the clips from the door.

3. Position the clips on the opposite side of the refrigerator door

and reinstall the screws.

4. Position handle over the clips.

5. Apply even pressure and push down to lock in place.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge Graphic 1C. Replace the

refrigerator door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge Graphic 1B. Do not tighten the screws completely.

3. Line up the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are in

place. Reinstall top hinge cover. See Top Hinge Graphic 1B.

2. Replace the base grille. See Base Grille Graphic 1A.

3. Plug into a grounded 3 prong outlet.

4. Reset the control. See “Using the Control.”

5. Return all removable door parts to door and food to

refrigerator.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Comments to this Manuals

No comments

Danby DFF501WDD User Manual Page 6

Comments to this Manuals

Related products and manuals for Fridges Danby DFF501WDD