Danby DKC646BLS Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
OPERATING INSTRUCTIONS
Using Proper Draw
Technique
1. Rinse a “Beer Clean” glass under cold water.
2. Place glass beneath tap, and tilt at a 45
o
angle. (as
shown in Fig. 13) Leaving approximately 1/4” between
glass and faucet.
3. Fully draw the dispenser handle and fill the glass to 2/3
full. (as shown in Fig. 14).
4. Level the glass and finish topping off by continuing the
pour in the center of the glass. (as shown in Fig. 15)
5. Make sure the handle is fully returned to it’s previous
‘off position when the draw is complete.
Using the proper draw
technique to dispense beer
should allow you to fill an
8 oz glass leaving approxi
mately 3/4”- 1” of ‘foam’.
Fig. 13
Fig. 14
Fig. 15
DO NOT.....
Correct
Draw
Incorrect
Draw
Fig. 16
16
• Begin the draw with the
glass in an upright position.
• Use frosted glassware, as
the difference in temperature
between a frozen glass and
the beer in the keg can
cause a ‘wild’ draw (too
much foam).
Partially (or slowly) draw the
dispenser handle, this will
lead to unnecessary
turbulence in the
dispenser
faucet as the beer travels
through it, causing a
substantial amount of foam
in the glass.
2
/
3
2 Barandillas cromadas (para colocar en la mesada)
4 Tornillos autorroscantes (para colocar la barandilla cromada)
1 Soporte para el cilindro de CO
2
1 Cilindro de CO
2
(vacío)
1 Regulador de CO
2
(indicador de presión alta/baja)
1 Manguera para la línea de CO
2
2 Conectores para la manguera de CO
2
(transparentes)
1 Enchufe para la manguera de CO
2
1 Acople para el barril de cerveza
1 Unidad de torre de cerveza (completa con canilla,
manguera, tuerca y arandela de goma
4 Tornillos para metal (para fijar a la torre de cerveza)
1 Sello (base de la torre de cerveza)
1 Manija (canilla de la torre de cerveza)
1 Placa de protección (piso del gabinete refrigerador)
1 Bandeja plástica de goteo (2 piezas)
4 Rueditas - 2 locking
16 Tornillos para metal (para rueditas)
Descripción
No. de P
arte
Traba de la canilla de cerveza #7703
Juego limpiador de la línea de #CLEANINGKIT
cerveza
Para obtener mayores detalles acerca de la compra de
cualquiera de los accesorios anteriores, llame a nuestro
departamento de servicio al cliente al 1-800-26-
(1-800-263-2629).
R
CARACTERÍSTICAS
ACCESORIOS
INCLUIDOS
Revise que todos los
accesorios suministrados con
esta unidad estén presente y
en buenas condiciones. Si
alguno de los accesorios no
está presente y/o en buenas
condiciones, llame a Danby
SIN CARGO al número
indicado más abajo y hable
con uno de nuestros
representantes de servicio
al cliente.
ACCESORIOS
OPCIONALES
No vienen incluidos con el
barril refrigerador, y deben
comprarse por separado.
47
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments