Danby DDW611WLED Use and Care Manual download pdf (Page 14)

Operating Instructions

STARTING A WASHING PROGRAM

You can modify the washing program when the dishwasher just runs for a

short time. Otherwise, the detergent may have already been released,

and the appliance may have already drained the wash water. If this is the

case, the detergent dispenser must be refilled.

To change the washing program, press the Start/Reset button to pause

the working program, and then press and hold the program button for at

least 3 seconds before choosing a different program and resuming the

wash cycle.

NOTE: If you open the door during washing, the machine will pause.

When you close the door and press the Start/Reset button the washing

resumes 10 seconds after you close the door.

The lights show the state of the dishwasher:

a) All phase lights off-----------------------------------On stand by

b) The display has no blinking-----------------------Being paused

c) The display is blinking------------------------------Running

CHANGING THE

PROGRAM

FORGOT TO ADD A

DISH?

A forgotten dish can be added any time before the detergent

cup opens.

Press the Start/Reset button to pause the cycle.

Open the door a little to stop the washing.

After the spray arms stop working, you can open the door completely

Add forgotten dishes.

Close the door

Press the Start/Reset button, the dishwasher will run after 10 seconds.

AT THE END OF THE

WASH CYCLE

When the working cycle has finished, the buzzer will sound for 8 seconds,

then stop. Turn off the appliance using the ON/OFF button, shut off the

water supply and open the door of the dishwasher. Wait a few minutes

before unloading the dishwasher to avoid handling the dishes and utensils

while they are still hot and more susceptible to breakage. They will also

dry better.

• Turn off the dishwasher

All the phase lights are off!

1.Switch off the dishwasher by pressing the ON/OFF button.

2.Turn off the water tap!

• Open the door carefully

Hot dishes are sensitive to impact. The dishes should therefore be

allowed to cool down around 15 minutes before being removed from the

appliance. Open the dishwasher's door, leave it ajar and wait a few min-

utes before removing the dishes. This way they will be cooler and the dry-

ing will be improved.

• Unloading the dishwasher

It is normal that the dishwasher is wet inside.

WARNING

It is dangerous to open the door during operation because the hot

water may scald you.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Comments to this Manuals

No comments

Danby DDW611WLED Use and Care Manual Page 14

Comments to this Manuals

Related products and manuals for Dishwashers Danby DDW611WLED