Danby DDW611WLED Use and Care Manual download pdf (Page 18)

Installation Instructions

The following things should be checked before starting the

dishwasher:

STARTING THE

DISHWASHER

The dishwasher is level and fixed properly

The water inlet valve is open

There is no leakage at the connections of the conducts. (Conductors?)

The wires are tightly connected

The power is turned on

Make sure the inlet and drain hoses are not twisted

All packing materials and removable printings should be taken out from

the dishwasher

Care and maintenance

The filter prevents larger remnants of food or other objects from

getting inside the pump.

The filter system consists of a coarse filter, a flat (main filter) and a micro

filter (fine filter).

FILTERING

SYSTEM

Main filter

Food and soil particles trapped by this filter are pulverized by a special jet

on the spray arm and washed down to drain.

Fine filter

This filter holds soil and food residue in the sump area and

prevents it from being redeposited on the dishes during a wash cycle.

Course filter

Larger items, such as pieces of bone or glass, that could block the drain

are trapped in the coarse filter. To remove the items caught by the filter,

gently squeeze the tap on the top of this filter and lift it out.

FILTER ASSEMBLY

The filter efficiently removes food particles from the wash water, allowing it

to be recycled throughout a cycle. For best performance and results, the

filter assembly must be regularly cleaned. For this reason, it is a good

idea to remove the larger food particles trapped in the filter after each

wash cycle by rinsing the filter and cup under running water. To remove

the filter assembly, pull upward on the cup handle in the upward direction.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 42 43

No comments

Danby DDW611WLED Use and Care Manual Page 18