Danby DDW611WLED Use and Care Manual download pdf (Page 20)

Care and maintenance

CARING FOR THE

DISHWASHER

(cont.)

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the noz-

zles, to prevent possible clogging. Wash them under running water and

carefully replace them in their proper position, checking that their rotary

movement is in no way impeded.

Grasp the middle of the spray arm, pull it upwards to remove it. Wash the

arms under a jet of running water and return them carefully to their posi-

tion. After reassembly, check that the spray arms turn freely.

HOW TO MAINTAIN YOUR DISHWASHER

• After Every Wash

Turn off the water supply to the appliance and leave the door slightly

open so that moisture and odours are not trapped inside.

• Remove the Plug

Before cleaning or performing maintenance, always remove the plug

from the socket.

• No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not use

solvents or abrasive cleaning products. Only use a cloth with warm

soapy water. To remove spots or stains from the surface of the interior,

use a cloth dampened with water with a little vinegar, or a cleaning

product made specifically for dishwashers.

• When it is Not in Use

It is recommend that you run a wash cycle with the dishwasher empty

and then remove the plug from the socket, turn off the water supply and

leave the door of the appliance slightly open. This will help the door

seals last longer and prevent odours from forming within the appliance.

• Seals

One of the factors that cause odours to form in the dishwasher is food

that remains trapped in the seals. Periodic cleaning with a damp sponge

will prevent this from occurring.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

No comments

Danby DDW611WLED Use and Care Manual Page 20