Danby DBC162BLSST Owner's Manual download pdf (Page 12)

Trouble Shooting

Problem Possible Cause What to do

be blown or the circuit

Plug not fully inserted into Make sure the 3-prong plug is fully

Door not shut properly Ensure that the door is fully closed

Exhaust vent is obstructed Verify there is nothing blocking the

Recently added a large Limit the quantity of warm beverages

quantity of warm beverages being introduced to the cabinet at the

to the cabinet same time. Attempt to stagger the

Condensation on the High humidity conditions The condensation will subside once

Door not shut properly Ensure that the door is fully closed

breaker tripped

Power surge Unplug the beverage center, wait a

too High

or opened excessively and that the gasket is sealing against

the cabinet. Open the doors only as

or opened excessively and that the gasket is sealing against

the cabinet. Open the door only as

No Power A fuse in your home may Replace fuse or reset circuit breaker

few seconds and then plug it back in

wall outlet inserted into outlet

Cabinet Temperature Temperature setting Verify the temperature control setting

Adjust if neccessary

needed and for short periods of time

front mounted exhausting vent

load introduction if possible

cabinet and/or doors in the home humidity conditions return to normal

needed and for short periods of time

Occasionally, a problem is minor and a service call may not be necessary - use this trouble shooting

guide for a possible solution. If the unit continues to operate improperly, call an authorized service

depot or Danby's Toll Free Number 1-800-263-2629.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

No comments

Danby DBC162BLSST Owner's Manual Page 12