INSTALLATION INSTRUCTIONS - OUTDOOR USE
CASTER ROLLER
INSTALLATION
Fig.1
Fig.2
Fig.3
2x
2x
4x
8x
a) Tilt the unit on it’s back on a level ground and remove
the 4 cabinet legs (Fig.3 number 4). Reserve the
cabinet legs.
b) Assemble the casters with brake (Fig.3 number 1) on
the cabinet front bottom and the other 2 casters (Fig.3
number 2) at the cabinet rear bottom.
c) Assemble each caster to the bottom of the unit with (2)
M5x10 screws with a star or Phillips screwdriver (Fig.3).
d) The caster brake (Fig.3 number 1) at the front bottom
of the cabinet comes with a braking function. When
brake handle is “ON” (Fig.2) unit wont roll, when brake
handle is “OFF” (released) it will roll. (Fig.2)
• Unplug the powercord and release the brake before
moving the cabinet.
• Do not put any goods on top of the cabinet and avoid
slanting the cabinet when moving it.
• Push the cabinet from the rear making sure the door
does not open.
• Please do not use the cabinet in bad weather to avoid
short circuits. Position the cabinet under a canopy.
• Do not let children climb the cabinet or move
the cabinet to another location.
• Keep the caster brake in “ON” position while in
desired location.
• The cabinet must be put on a level ground.
• The cabinet will reach it’s cooling effciency after one
hour.
WARNING
4
Comments to this Manuals