Danby DPA110B2WDD Specifications download pdf (Page 8)

Ensure the unit is plugged in and has power.

How to use the buttons

Auto Operation

Ensure that the unit is plugged in and has power.

The OPERATION indicator will illuminate on the

display panel of the unit.

1. Press the MODE button until AUTO is selected.

2. Press the TEMP button to set the desired

temperature. The temperature can be set within a

range of 17°C (62°F) to 30°C (86°F) by 1°C (2°F)

increments.

conditioner.

NOTE

1. In the auto mode, the air conditioner can

automatically choose the mode of Cooling, Fan,

difference between

the actual room temperature

and the set

temperatrue on the remote control.

2. In the auto mode, you can’t switch the fan speed.

3. If the auto mode doesn’t suit you, the desired

mode can be controlled manually.

Cooling /

Fan Operation

1. Press the MODE button to select COOL,

FAN mode.

2. Press the TEMP button to set the desired

temperature. The temperature can be set within a

range of 17°C (62°F) to 30°C (86°F) in 1°C (2°F)

increments.

3. Press the button to select one of

4 fan speeds -Auto, Low, Med, or High.

4. Press the button to start the air

conditioner.

NOTE

In the FAN mode, the temperature setting is not

displayed in the remote control and you are not

able to control the room temperature either. In this

case, only step 1, 3, and 4 may be performed.

Dehumidifying by sensing the

3. Press the button to start the air

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Danby DPA110B2WDD Specifications Page 8