Danby DCR032C1BDB Manual download pdf (Page 6)

DOOR REVERSAL

INSTRUCTIONS

If you find the direction of opening the door on your appliance

inconvenient, you can change it by following the diagram below.

To avoid personal injury to yourself and/or property, we recommend

someone assist you during the door reversal process.

CAUTION

Installation Instructions

Ensure the appliance is unplugged•

and empty.

We recommend that 2 people handle•

the refrigerator during assembly.

Adjust the 2 leveling feet to their•

highest position.

Tools Required

Cross-bladed screw driver - Phillips head

*NOTE:

To take the door off it is necessary to•

tilt the appliance backward.

You should rest the appliance on•

something solid e.g a chair just

below the top panel.

DO NOT lay the appliance completely

flat as this may damage the coolant

system.

Figure 1

Figure 2

Remove the plastic hole covers1

which are located on the top left

side of the refrigerator as shown in

Figure 1.

Remove the upper hinge and hinge2

cover on the right side of the refrig-

erator, as shown in Figure 2.

Remove the door and incline the refrig-3

erator at an angle of 45 degrees. You

should rest the refrigerator against

something solid so that it will not slip

during the door change process. Do

not lay the refrigerator flat as this may

damage the coolant system. On the

underside of the refrigerator, remove

the lower hinge bracket on the right

side and the leveling foot on the left

side and reverse their positions as

shown in Figure 3.

Figure 3

Figure 4

Install the lower hinge on the left side4

on the bottom of the refrigerator.

Install the adjustable foot on the right

side as shown in Figure 4.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments

Danby DCR032C1BDB Manual Page 6

Comments to this Manuals

Related products and manuals for Fridges Danby DCR032C1BDB