Danby DWC018A1BDB User Manual download pdf (Page 8)

LOCATION

• Select a location with a strong, level ﬂ oor.

• Remove the exterior and interior packaging.

• Wipe the outside thoroughly with a soft, dry cloth and the inside with a wet, lukewarm cloth.

• Avoid placing the unit in a narrow recess or near any heat source, direct sunlight or moisture.

• Let air circulate freely around the cabinet.

• Keep the rear and sides of the wine cooler at least 12.7 cm (5 inches) away from all adjacent

walls.

• DO NOT use this appliance outdoors. This appliance is intended for household use only. Do not

attempt to operate or store this appliance outdoors.

• DO NOT build this unit into an enclosure. This appliance is designed for a free-standing

application only and is not intended to be built-in.

FEATURES

Installation Instructions

LEVELING INSTRUCTIONS

Beneath the wine cooler there is leveling leg on the hinge side of the

unit. It is important that your wine cooler is level. To level the unit:

1. Move the wine cooler to its ﬁ nal location.

2. Turn the leveling leg clockwise as far as it will go, until the top of

the foot is touching the bottom of the chassis.

3. Slowly turn the leveling leg counter-clockwise until the unit is level.

Fig A

Raises

the Leg

(lowers

the unit)

Lowers

the Leg

(raises

the unit)

1. Tempered glass door: tinted for UV

protection while still allowing for easy

interior viewing.

2. Magnetic Door Gaskets: Tight ﬁ tting

seals retain all the cooling power and

humidity levels.

3. Leveling Legs

4. Plastic coated shelves: Odor

resistant, rustproof and removable for

easy cleaning.

5. Thermostat dial: externally mounted

rear wall thermostat. Controls the

temperature inside the wine cooler.

6. Interior light (not shown): illuminates

the compartment.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

Danby DWC018A1BDB User Manual Page 8

Comments to this Manuals