Danby DWC053D1BSSPR User's Guide download pdf (Page 10)

Installation Instructions - Door Swing Reversal

1 Bottom hinge (Right) 2 Screws 3 Door axis

4 Screws 5 Reed swith 6 Top hinge (Right)

7 Screws 8 Top hinge (Left) 9 Decorative nail

Fig 1A

Fig 1B

Fig 1D

Fig 1C

1 When open the door 90 degree, take out 2 screws from lower door axis (3),

remove the door refer Fig. 1A, then pull out the door and door axis (Fig. 1A).

2 Put the door safety,unscrew 2 screws (4) at bottom and remove

the Reed switch (5),then install (5) at top of door frame,

(Fig. 1A/1B)

3 Make out 3 screws (7) from top hinge (right) (6) and remove the right top

hinge. (Fig. 1C)

4 Remove decorative nail (9) from left top of cabinet and install spare top

hinge (Left) (8) at left top of cabinet with 3 screws. (Fig. 1D)

5 According above procedure, install spare lower hinge (left) (10) onto left

lower cabinet. (Fig. 1E)

6 The door revolves 180 degrees, install the door with same way it was removed

and fix it with door alightment.

7 Block the hole at right top of cabinet with spare decorative nail.

Fig 1E

10 Bottom hinge (Left)

Please note: Do not lay the unit on it's back while reversing the door swing.

1 2 ... 5 6 7 8 9 10 11

No comments

Danby DWC053D1BSSPR User's Guide Page 10