Danby SRVBC050R Installation Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
www.silhouetteappliances.com 8
INITIAL SETUP
5. Initial setup procedure
Temperature Zone
The temperature zone icon will fl ash, displaying
“00”. Touch the “+” and “-” icons to increase or
decrease the set temperature in 1° increments.
When the desired temperature is selected, touch the
temperature display to confi rm the selection.
The temperature can be set between 32°F - 44°F
(0°C - 6°C).
The illuminated temperature ring will change colour
depending on the temperature selected. There are
three temperature zone settings: Cellar, Cool and
Cold.
Primary Menu
Audio
The audio icon will fl ash. Touch the audio icon once
to maintain audible prompts and the icon will be
100% illuminated. Touch the audio icon a second
time to silence audible prompts and the icon will be
50% illuminated.
Temperature Scale
The temperature scale icon will fl ash. Touch this
icon to toggle between Fahrenheit and Celsius
temperature scales. Depending on the selected
scale, a “C” or an “F” will illuminate beside the
temperature readout inside the ring.
Display Settings
The display interface can be set to continuous
illumination or it can be turned off. When the
display icon is fl ashing, touch it once to set the
display to “on” and the icon will illuminate at 100%.
Touch this icon again to set the display to “off” and
the icon will illuminate at 50%.
If the display is set to “off”, the icons required for
the setup procedure will remain active at 50%
illumination until the setup is complete, at which
point the display will turn off until interacted with,
except for the Silhouette logo, which remains
illuminated at 50% to indicate that the appliance is
still in operation. The display will illuminate once the
door is opened and will remain illuminated for two
minutes after the door is closed.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments