Danby DCR017A2WDB Operations Instructions download pdf (Page 5)

DOOR REVERSAL

INSTRUCTIONS

If you find the direction of opening the door on your appliance

inconvenient, you can change it by following the diagram below.

To avoid personal injury to yourself and/or property, we recommend

someone assist you during the door reversal process.

CAUTION

Installation Instructions

LOCATION

Remove exterior and interior packaging, wipe the outside thoroughly with a

soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the

unit in a narrow recess or near any heat source, direct sunlight, or moisture.

Let air circulate freely around the unit. Keep the rear of the refrigerator 5

inches away from the wall.

Location

Do not tilt the refrigerator more than 45° from the upright position

during movement.

1) Select a place with a level surface.

2) Allow 5 inches of space between the back of the refrigerator and any

adjacent wall.

3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic

coating. Heat sources nearby will cause higher electricity consumption.

4)Avoid damp places. Too much moisture in the air will cause frost to

form very quickly on the evaporator, and your refrigerator will have to be

defrosted more frequently.

Step 1

Step 2

Step 3

Step 4

• Ensure the appliance is unplugged and

empty.

• Adjust the 2 leveling feet to their

highest position.

Tools Required

Cross -bladed screw driver - Phillips

head

*NOTE:

- To take the door off it is necessary to

tilt the appliance backward.

- You should rest the appliance on

something solid e.g a chair just below

the top panel.

DO NOT lay the appliance completely

flat as this may damage the coolant

system.

1 2 3 4 5 6 7 8 9 10 ... 16 17

Comments to this Manuals

No comments

Danby DCR017A2WDB Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Unknown Danby DCR017A2WDB