Danby DAC12078EE Operations Instructions download pdf (Page 7)

KEY PAD FEATURES

LED DISPLAY: Displays the following information

independently;Set Temperature, Ambient Room Temperature

and Auto Timer On/Off settings.

POWER: Turns unit On/Off.

MODE: Allows you to scroll through and select the

desired operating mode; Cool , Dry , Fan Only and *Auto

.The selected mode will be denoted by the adjacent indicator

light.*‘Auto’is a pre-set factory program that automatically

defines the mode (Cool or Dry) and fan speed based on the set

temperature.

FAN SPEED: Select from four different fan settings;Low

, Medium , High and Auto during Cool and Fan Only mode.

Please note: During ‘Dry’ mode the fan speed is automatically

defined .

ENERGY SAVER: Automatically cycles the fan on and

off while the compressor is not in use.

TEMP / TIMER CONTROL: Used to increase or

decrease the Temperature setting in 1°C increments, and

Auto-Timer On/Off settings in 30min./1hr. increments.

Note:This appliance displays temperature in °C ONLY.

CHECK FILTER: The adjacent indicator light will

illuminate as a reminder to clean the air conditioner filter (see

page 9) Once the filter has been cleaned and replaced,

depress the Check Filter button in order to resume operation.

SLEEP MODE: When activated, the current set

temperature is gradually increased over a one (1) hour period

then maintained for seven (7) hours. Once the program is

complete, the air conditioner will resume to its previous set

temperature (before sleep mode was activated). This feature is

meant to be used during the night time hours to prevent the

room from getting too cold (while you sleep) and results in

less compressor running time and reduced energy

consumption. Sleep mode may be cancelled by depressing the

Sleep Mode button while the program is running.

AUTO-TIMER: Used to initiate the Auto On/ Auto Off

timer.

While the Air Conditioner is off (Auto-On):

1) Press the Auto-Timer button once and the adjacent Auto-On

indicator light will

illuminate.

2) Use the Temp/Timer control cursors to select adelayed

Ontime of up to 24 hours.

Temp/Timer

Control

Check

Filter

Mode

Selector

Energy

Saver

LED

DISPLAY

Auto

Timer

Sleep

Mode

Fan

Speed

Power

Button

3) Select the appropriate mode under which

you want the unit to operate (Auto-Cool-Dry-

Fan Only)

4) Select the fan speed setting.

5) The time you selected will appear in the

LED display.

While the Air Conditioner is on (Auto-Off):

1) Press the Auto-Timer button twice and the

adjacent Auto-Off indicator light will

illuminate.

2) Use the Temp/Timer control cursors to select

a delayed Off time of up to 24 hours.

3) The time you selected will appear in the

LED displayThe Auto On and Auto Off timer

can operate during the same program by

defining the Auto-Off parameters immediately

after the Auto On parameters. The Auto-Timer

may be cancelled at any time by turning the

unit On/Off.

OPERATING INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Comments to this Manuals

No comments

Danby DAC12078EE Operations Instructions Page 7

Comments to this Manuals

Related products and manuals for Split-system air conditioners Danby DAC12078EE