Danby DAC10000 Operations Instructions download pdf (Page 4)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

ELECTRICAL

SPECIFICATIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

1) All wiring must comply with local and national electrical codes and must

be installed by a qualified electrician. If you have any questions

regarding the following instructions, contact a qualified electrician.

2) Check available power supply and resolve any wiring problems

BEFORE installing and operating this unit.

3) For your safety and protection, this unit is grounded through the power

cord plug when plugged into a matching wall outlet. If you are not sure

whether your wall outlet is properly grounded, please consult a qualified

electrician.

4) The wall outlet must match the 3-prong plug on the service cord

supplied with the unit. DO NOT use plug adapters. If it is necessary to

use an extension cord to connect your air conditioner, use an

approved “air conditioner” extension cord only (available at most

local hardware stores).

5) The rating plate on the unit contains electrical and other technical data.

The rating plate is located on the right side of the unit, above the power

cord.

POWER SUPPLY CORD

NOTE: Your unit’s device may differ from the one shown.

This room air conditioner is equipped with a power supply cord required by

ULC. This power supply cord contains state-of-the-art electronics that

sense leaking current. If the cord is crushed, the electronics detect leaking

current and power will be disconnected in a fraction of a second.

To test your power supply cord:

1. Plug power supply cord into a grounded 3 prong outlet.

2. Press RESET (on some devices, a green light will turn on).

3. Press TEST (listen for a click; Reset button will trip, and on some

devices, a green light will turn off).

4. Press and release RESET (listen for a click; Reset button will latch, and

on some devices, a green light will turn on). The power supply cord is

ready for operation.

LCDI

TEST

RESET

POWER

B A

ELECTRICAL

SPECIFICATIONS

WARNING: To reduce the risk of fire, electrical shock or injury

when using your air conditioner, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Unplug air conditioner before servicing.

• Use two or more people to move and install air conditioner.

1 2 3 4 5 6 7 8 9 ... 38 39

Comments to this Manuals

No comments

Danby DAC10000 Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Mobile air conditioners Danby DAC10000