Danby DFF100C2WDD Manual download pdf (Page 9)

OPERATING

FREEZER

COMPARTMENT

FREEZER TEMPERATURE CONTROL

• Your refrigerator has one vent control for regulating the temperature in the

freezer compartment (See Fig.4.). The temperature control is located on the

center of the freezer compartment’s interior back panel.

• The first time you turn the unit on, adjust the temperature control knob to

“MAX” and let the unit run for at least 2 hours before putting food inside. This

will ensure that the freezer cabinet is thoroughly chilled before food is put in.

• The FREEZER temperature control ranges from "MIN" (the warmest) to

"MAX" (the coldest). Adjust this control to get the desired temperature. The rec-

ommended factory setting is MEDIUM (half way between “MIN” and “MAX”).

THE FREEZER COMPARTMENT

• This compartment is designed for the long-term storage of frozen food.

Storage time period is up to three months.

• The storage life of frozen foods varies and the recommended storage time

should not be exceeded.

• Place frozen food into the freezer as quickly as possible after purchase. If

there are instructions on the package, carefully follow these

instructions regarding storage times.instructions regarding storage times.

Freezer Temperature Control

MIN

MAX

Operating Instructions

NOTE:

• If the unit is unplugged, you must wait 3 to 5 minutes before restarting the

unit (plugging the unit back in). If you attempt to restart before 3 to 5 minutes,

the refrigerator will not start.

• If the power goes out, the unit should restart itself when the power comes

back on.

• Large amounts of food will lower the cooling efficiency of the appliance.

• Do not place food so that it blocks an air vent, and leave adequate space

between food items for air flow in the cabinet.

• Allow several hours for temperature to stabilize between two

temperature selections.

• Selecting different temperatures on the refrigerator digital temperature

display, will affect the temperature in BOTH the fridge and the freezer compart-

ments.

OPERATING YOUR

REFRIGERATOR

REFRIGERATOR TEMPERATURE CONTROL

• There is a digital temperature display panel in the REFRIGERATOR com-

partment (See Fig.2.). The digits on the upper line are in degrees Celsius,

while the bottom digits are in degrees Fahrenheit.

• Press the “-” sign or ”+” sign to reach the desired temperature.

• The first time you turn the unit on, please select 2°C/36°F and let the unit

run for at least 2 hours before putting food inside. This will ensure the refrig-

erator compartment is thoroughly chilled before food is put in. The recom-

mended factory setting is 4°C / 39°F.

Temperature

Température

Fig. 2

Fig. 4

Fig. 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Comments to this Manuals

No comments

Danby DFF100C2WDD Manual Page 9

Comments to this Manuals

Related products and manuals for Freezers Danby DFF100C2WDD