Danby DCF1014WE User Manual download pdf (Page 6)

Power Light (on some models)

• The power light normally will be "on".

• Its purpose is to warn you when there is a power

absence. If for any reason the power to the freezer is

interrupted (blown fuse, loose plug, etc.) the indicator

light will be "off".

• WARNING: The presence of the light does not

indicate proper food temperatures, or proper operation

of the refrigeration system.

• Flickering light indicates faulty or burned out light.

- 5 -

WARNING: FAILURE TO DISCONNECT FREEZER FROM POWER SUPPLY WHEN

CHANGING BULB COULD RESULT IN PERSONAL INJURY

Interior Light (on some models)

• Turns on whenever you open the lid to your freezer.

• When changing the interior light, disconnect freezer from power supply, replace old bulb with

new appliance bulb with similar wattage and re-connect freezer to power supply.

Freezer Features (continued)

WARNING: FAILURE TO DISCONNECT FREEZER FROM

POWER SUPPLY WHEN CHANGING BULB

COULD RESULT IN PERSONAL INJURY

Step 1. Remove the outer cabinet drain plug by twisting and pulling.

Step 2. Insert the drain hose adaptor into the drain hole and connect

the hose to the adaptor. Run the hose down towards a suitable drain.

Step. 3. Remove the interior drain plug by twisting and pulling. When

the water in the freezer has been drained, replace the parts removed

earlier.

Defrost Drain (on some models)

The outer cabinet drain plug is located on the outside of the freezer at the front bottom left hand corner.

The interior plug is located on the inside of the freezer on the left side of the floor. The drain hose

adaptor can be located in the plastic bag with the Use & Care Guide. The purpose of the defrost drain

is to allow quicker and more convenient clean up of water.

Built-in Lock (on some models)

• A built-in lock allows you to keep your food supply secure if necessary.

• An excellent tool to help reduce the hazard of child entrapment.

• This type of lock is spring loaded, preventing the key from being left in the lock.

To lock or unlock the freezer, you must hold the key in the lock while turning.

Some models feature a temperature monitor that provides an audible alarm. The temperature monitor

alarm is located above the temperature control. The alarm sounds if the temperature in the freezer rises

10°F or more above normal for selected setting. Alarm may sound if the temperature control dial is turned

to a much lower/colder setting or if a large amount of unfrozen food is added at one time. Alarm is

controlled by a three position switch.

· 0 or OFF prevents alarm from sounding when freezer is warm, such

as during initial start-up or defrosting.



 or TEST sounds alarm regardless of temperature. Alarm system

should be tested at least once a month.

· 1 or ON is proper setting for normal freezer use. Return switch to 1

after defrosting.

Temperature Monitor Alarm (on some models)

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Danby DCF1014WE User Manual Page 6

Comments to this Manuals

Related products and manuals for Drink coolers Danby DCF1014WE