Danby DTT100A1WDB Manual download pdf (Page 9)

WASHING PROCEDURE

.C) Wash

1. Water Level

Set the water level properly according to the

size of the load to be washed.

2. Drain Valve selection switch

Set the drain valve selection switch on

“Wash/Rinse” position

3. Detergent

Put in the laundry detergent (If the detergent

does not dissolve easily, fill the washing

machine with a small amount of water and mix

the detergent with the water for a few minutes)

4. Clothes

Put in the clothes

(remove any matches, coins, pins, etc., that

may be in the pockets of the clothes.)

5 Water supply

Open the water tap and fill the tub to a suitable

water level for the wash load.

6. Wash action

Select a wash action according to the type of

fabric to be washed: Gentle, Normal

7. Wash-tub lid

Close the wash tub lid

8. Wash timer

Turn the wash timer clockwise, until you reach

the desired wash time position. The wash cycle

starts immediately.

D) Rinse

1. Drain

Set the drain valve selector switch on DRAIN

position It takes about two minutes for the water

to drain thoroughly away.

2. Drain switch

Set the drain valve selector switch on

WASH/RINSE position again, to stop the drain

cycle

3. Water supply

Open the water tap and fill the tub to a suitable

level for the laundry

4. Rinse-wash timer

Turn the wash timer to clockwise

Set the time to 2-4 minute position

5. Repeat processes 1 to 4 twice or three

times according to the condition of the

washed laundry.

8

Wash/Rinse Drain

Wash timer

Soft

Wash action

Heavy

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Comments to this Manuals

No comments